Shop - Noel Industries https://noelindustries.com/shop/ Aluminum Boat Accessories, T rail Accessories, Fabrication, and More! Fri, 17 Jul 2026 12:50:46 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.4 https://noelindustries.com/wp-content/uploads/2021/12/cropped-NoelLogoBlack512x512-32x32.png Shop - Noel Industries https://noelindustries.com/shop/ 32 32 256090986 Fuel Jug Retainer Ring https://noelindustries.com/product/fuel-jug-retainer-ring/ Sun, 12 Jul 2026 00:53:56 +0000 https://noelindustries.com/?post_type=product&p=21607 Purchase includes:

  • 1 – Fuel Jug Retainer Ring with rubber trim (Tuff Jug 3 1/8″ or VP 3 1/2″ per selection)
  • 1 – 4″ stainless steel detent lock pin

*Fuel Jug Retainer Mount and fuel jug not included

… Continue readingFuel Jug Retainer Ring

The post Fuel Jug Retainer Ring appeared first on Noel Industries.

]]> Fuel Jug Retainer Ring

Replacement / add-on neck ring for the Noel Industries Fuel Jug Retainer Mount. The ring fits snug against the neck of the jug under the cap, and the included detent lock pin lets you detach the jug in seconds for on-demand use.

Available in two sizes: Tuff Jug style (3 1/8″ inside diameter) and VP style (3 1/2″ inside diameter).

Comes with 1 individual ring and 1 detent pin, constructed from 1/4″ Aluminum with rubber trim and powder coated textured black for durability.

The post Fuel Jug Retainer Ring appeared first on Noel Industries.

]]> 21607 Dual Pole Mount for Shallow Water Anchor https://noelindustries.com/product/dual-pole-mount-for-shallow-water-anchor/ Sun, 12 Jul 2026 00:53:44 +0000 https://noelindustries.com/?post_type=product&p=21604 Purchase includes:

  • 2 – Noel Industries LLC pole mount brackets
  • 4 – Rubber pole clips (3/4″ or 1″ diameter per selection)
  • All stainless steel mounting hardware
    • 4 – 3/4″ long 1/4″-20 carriage bolts
    • 4 – 1/4″ washers
    • 4 – 1/4″-20 cap nuts
    • 4 – 10-24 tapered head screws (length matched to clip size)

*anchor pole not included

… Continue readingDual Pole Mount for Shallow Water Anchor

The post Dual Pole Mount for Shallow Water Anchor appeared first on Noel Industries.

]]> Dual Pole Mount for Shallow Water Anchor

This Dual Pole Mount kit securely holds your shallow water anchor poles / spud poles while you’re running from hole to hole. The two brackets mount to your boat’s T-rail (or bolt to any flat surface), and the rubber pole clips snap your pole in and out in seconds — no straps, no rattles, no pole rolling around the deck.

Constructed from 1/4″ Aluminum and powder coated textured black for durability.

The post Dual Pole Mount for Shallow Water Anchor appeared first on Noel Industries.

]]> 21604 Grab Handle (Shorty) https://noelindustries.com/product/grab-handle-shorty/ Mon, 30 Mar 2026 21:46:09 +0000 https://noelindustries.com/product/grab-handle-shorty/ T-rail mount grab handle (Shorty). All TIG welded and powder coated textured black.

… Continue readingGrab Handle (Shorty)

The post Grab Handle (Shorty) appeared first on Noel Industries.

]]> One single T-rail mount grab handle (Shorty). All TIG welded, powder coated textured black, and comes with stainless mounting hardware.

The post Grab Handle (Shorty) appeared first on Noel Industries.

]]> 18689 Weld On Rails/Handles https://noelindustries.com/product/weld-on-rails-handles/ Fri, 26 Dec 2025 15:29:07 +0000 https://noelindustries.com/?post_type=product&p=16543
  • 3 Foot Bow Rails (34 inch)
  • 4 Foot Bow Rails (46 inch)
  • Grab Handle (19 inch)
  • Shorty Grab Handle (10 inch)

    • Select an option for details on a specific selection. … Continue readingWeld On Rails/Handles

    The post Weld On Rails/Handles appeared first on Noel Industries.

    ]]>     Collection of rails and grab handles offered to customers wishing to weld and paint themselves.

    Currently offering below options:

    3 Foot Bow Rails

      • Set of two, 3 foot bow rails. Each rail has three mount points that are to be welded to surface and they come with a raw aluminum finish.
      • Overall end to end length of each rail is 34 inches long.

    *Intended to be welded on and painted by customer.

    4 Foot Bow Rails

      • Set of two(2), 4′ bow rails. Each rail has three mount points that are to be welded to surface and they come with a raw aluminum finish.
      • Overall end to end length of each rail is 46 inches long.

    *Intended to be welded on and painted by customer.

    Grab Handle (19 inch)

      • One single 19″ grab handle with raw aluminum finish.

    *Intended to be welded on and painted by customer.

    Shorty Grab Handle (10 inch)

      • One single 10″ grab handle with raw aluminum finish.

    *Intended to be welded on and painted by customer.

     

    The post Weld On Rails/Handles appeared first on Noel Industries.

    ]]>     16543     Gift Card https://noelindustries.com/product/gift-card/ Mon, 10 Nov 2025 16:04:54 +0000 https://noelindustries.com/product/gift-card/ Short Description:
    Give the perfect gift with a Noel Industries digital gift card — instantly delivered by email and redeemable on any future order. No expiration, no limits, all convenience. … Continue readingGift Card

    The post Gift Card appeared first on Noel Industries.

    ]]>     Noel Industries Digital Gift Card

    Give the gift of choice with a Noel Industries Digital Gift Card — perfect for any occasion.

    Details:

    • Redeemable for future orders on the Noel Industries website.

    • Delivered instantly by email to the recipient after purchase.

    • Can be applied during checkout on the Noel Industries online store.

    • No expiration date.

    • Valid on all products sitewide.

    The post Gift Card appeared first on Noel Industries.

    ]]>     15749     Replacement Grommet (For Fuel Jug Retainer Mount) https://noelindustries.com/product/replacement-grommet/ Thu, 28 Aug 2025 13:43:19 +0000 https://noelindustries.com/?post_type=product&p=15037 Replacement inner grommet designed for the Fuel Jug Retainer Mount. Perfect fit for worn or damaged grommets, restoring a secure hold and reliable performance. … Continue readingReplacement Grommet (For Fuel Jug Retainer Mount)

    The post Replacement Grommet (For Fuel Jug Retainer Mount) appeared first on Noel Industries.

    ]]>     This replacement inner grommet is specifically designed for the Fuel Jug Retainer Mount. Over time, heavy use and exposure can cause the original grommet to wear out or lose its grip. Swapping it with this replacement ensures your retainer mount continues to hold fuel jugs securely in place, preventing unwanted movement during transport or storage.

    Crafted from durable, high-quality rubber, this grommet provides a snug fit and restores the mount’s original functionality without the need to purchase a full replacement unit. Easy to install, it’s the perfect solution for extending the life of your Fuel Jug Retainer Mount.

    The post Replacement Grommet (For Fuel Jug Retainer Mount) appeared first on Noel Industries.

    ]]>     15037     Stainless Steel Hardware Replacement Pack https://noelindustries.com/product/hardware_replacement_pack/ Tue, 26 Aug 2025 20:20:06 +0000 https://noelindustries.com/?post_type=product&p=14940 The hardware replacement pack contains the below pieces for each package ordered

    • 4 stainless steel bolts
    • 4 stainless steel flat washers
    • 4 stainless steel acorn style nuts

    … Continue readingStainless Steel Hardware Replacement Pack

    The post Stainless Steel Hardware Replacement Pack appeared first on Noel Industries.

    ]]>     The hardware replacement pack contains the below pieces for each package ordered

    • 4 stainless steel bolts
    • 4 stainless steel flat washers
    • 4 stainless steel acorn style nuts

    Each replacement hardware pack is determined by the boat manufacturer and product selected in the order. This selection can alter the size of the bolts, washers and acorn nuts that are included in the package so please ensure the appropriate manufacturer and product is selected when ordering the replacement hardware.

    The post Stainless Steel Hardware Replacement Pack appeared first on Noel Industries.

    ]]>     14940     Dual Drain Plug Holder https://noelindustries.com/product/tr2025002-dual_drain_plug_holder/ Sun, 19 Jan 2025 21:38:19 +0000 https://noelindustries.com/?post_type=product&p=11372 The Noel Industries Dual Drain Plug Holder package includes:

    • 1 Dual Drain Plug Holder

    Stay organized and prepared with this essential boating accessory! … Continue readingDual Drain Plug Holder

    The post Dual Drain Plug Holder appeared first on Noel Industries.

    ]]>     Keep your boat plugs organized and within easy reach with the Dual Drain Plug Holder from Noel Industries. Designed for convenience and durability, this innovative holder features two slots to securely store your boat plugs, ensuring they’re never misplaced when you need them most. This accessory can be riveted or screwed to any surface.

    Crafted from high-quality, corrosion-resistant materials, it’s built to withstand the harsh marine environment. The compact design makes it easy to mount in your boat, garage, or dockside workstation, keeping your boating essentials neatly organized. Whether you’re a casual weekend boater or a seasoned captain, the Dual Drain Plug Holder is the perfect accessory to simplify your gear management.

    Key Features:

    • Two dedicated slots for securely storing boat plugs
    • Durable, corrosion-resistant materials for long-lasting performance
    • Compact and mountable to any surface
    • Ideal for boats, garages, and dockside setups
    • Manufactured with precision and reliability by Noel Industries

    Ensure your boat plugs are always ready to go with the trusted quality of Noel Industries!

    The post Dual Drain Plug Holder appeared first on Noel Industries.

    ]]>     11372     Turtle Shell Mounting Bracket (Base Bracket Only) https://noelindustries.com/product/turtle-shell-base-bracket-only/ Fri, 03 Jan 2025 21:49:10 +0000 https://noelindustries.com/?post_type=product&p=11238 Purchase Includes

    • 1 × Mounting Bracket that fits our Turtle Shell product
    • Common T Rail Hardware - Stainless steel T-rail mounting hardware

    Note: Turtle Shell product sold separately. … Continue readingTurtle Shell Mounting Bracket (Base Bracket Only)

    The post Turtle Shell Mounting Bracket (Base Bracket Only) appeared first on Noel Industries.

    ]]>     Turtle Shell Mounting Bracket
    Securely mount your Turtle Shell with this durable, purpose-built bracket—specially designed for seamless compatibility with our Turtle Shell product. This bracket ensures reliable support for a confident, space-saving installation on a boat rail or any type of surface.

    Key Features

    • Perfect Fit: Engineered exclusively for the Turtle Shell product
    • Sturdy Construction: Made with high-quality materials to hold your Turtle Shell securely
    • Easy Installation: Installs to any t rail (angled or vertical) or can attach to any vertical surface.

    Important Note: This listing is for the Mounting Bracket only. The Turtle Shell product is sold separately.

    The post Turtle Shell Mounting Bracket (Base Bracket Only) appeared first on Noel Industries.

    ]]>     11238     Turtle Shell – Turtlebox Mounting Bracket https://noelindustries.com/product/turtle-shell-turtlebox-mounting-bracket/ Mon, 06 Nov 2023 20:29:19 +0000 https://noelindustries.com/?post_type=product&p=5355 Purchase includes:

    • 1 Noel Industries LLC Turtle Shell Mounting Bracket including
      • Common T Rail Hardware - Stainless steel T-rail mounting hardware
        OR
      • "Edge" boat rail style - Stainless steel Edge boat rail mountin hardware
      • Stainless steel quick release pin (with tether)

    … Continue readingTurtle Shell – Turtlebox Mounting Bracket

    The post Turtle Shell – Turtlebox Mounting Bracket appeared first on Noel Industries.

    ]]>     Meet the Turtle Shell: The ultimate Turtlebox speaker mount with a quick-disconnect feature, without leaving a big box or tray left behind.  Designed for boaters and outdoor enthusiasts of all kinds, with the shell crafted from sturdy 1/8″ aluminum.  This mount can easily secure your speaker to a variety of surfaces like boat T-rails, truck bed rails, kayaks, and side by sides.  Resistant to the harshest elements, it offers quick and easy installation and removal. The Turtle Shell optimizes Turtlebox mounting and placement enhancing outdoor audio experience with its durable build and extreme versatility. Whether you’re on the water, in the woods, or at the tailgate party.   It is the ideal addition for anyone utilizing the best and most versatile bluetooth speaker on the market.  Grab your Turtle Shell and embark on your next  journey with ease!

    (Compatible with GenII and GenIII Turtlebox)

    The post Turtle Shell – Turtlebox Mounting Bracket appeared first on Noel Industries.

    ]]>     5355